Red light is flashing. Most Roku streaming players have a light on the front of the unit. Under normal operation this light is either off or white, and may flash when you press buttons on your remote control. However, it will FLASH RED when your device has insufficient power. Note: If the RED LIGHT IS SOLID (not flashing), your device is Remove a battery from the remote and press a button to discharge the remote entirely. Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times. The remote is now reset to its factory defaults. When your remote stops working, the first thing to check is its batteries. It's possible the batteries aren't properly inserted, or the battery charge has all been used. In the first case, remove the batteries from the remote and reinsert them. If that doesn't work, replace the old batteries with new ones and see if that fixes the issue. Product Description. Brand New, ORIGINAL Sharp GJ221 LCD TV REMOTE CONTROL Model: GJ221 (No Battery Included) Part #: 9JY640147040000 Originally Supplied With Models: LC-32D59U * LC-42D69U * SVD-3815. Reboot your Roku TV. Unplug your TV to drain the power. Press the power button on your device for as long as the user manual says. Then plug the TV back in and try to turn it on. You could also try the remote sequence to reboot your TV: Press Home five times > Up arrow > Rewind > Fast forward . Step 4. Point your remote at the device you just programmed it to work with. Turn the device off and on using the remote to make sure the programming process worked. If you’ve recently replaced a component in your home entertainment center, such as your television or cable box, your Sharp universal remote won’t work with the device until But first, make sure you’re using the correct remote for your Sharp TV model. Each model comes with its own remote, with different buttons and functions, so ensure you’re using the right one. If pressing the power button doesn’t work, try unplugging your TV manually and plugging it back in while holding down the power button for 10 seconds. 4TVNR1.

sharp tv remote not working